Silicone gel

Features: A room temperature and heating curing type liquid addition type silicone gel, the product has good transparency, good fluidity, fast curing, can be poured, and is a transparent elastomer after curing. In addition, it has excellent moisture-proof, waterproof, ozone resistance, radiation resistance, weathering resistance and other characteristics, and can be used for a long time at -60~200 ℃. When using, two components in accordance with A:B = 1:1 (weight ratio) mix can be used. The product is non-corrosive to metal and non-metal materials during and after curing, and can be cured at the same time at deep levels inside and outside. Application: It can be widely used in pouring and filling of electronics, electrical appliances, instrumentation components to achieve the purposes of moisture-proof, shock-proof, damping, insulation and sealing. Can also be used for insulation, sealing, bonding of electronic components and high-voltage power devices potting, suitable for self-adhesive requirements of shock absorption, stress elimination and good bonding packaging. Main models: TLN-204,TLN-400,TLN-206,TLN-401,TLN-410,TLN-200A......

Solvent-free three-proof paint

Recommend model: GC-602. Features: meet the requirements of environmental protection policy, the composition of one hundred percent solid, the reaction has uniformity, the dimensional stability of the film is good, the viscosity is moderate (can be sprayed, brush, dip)

Two-component addition (condensation) glue

Features: Tuoli potting silicone rubber includes two-component addition glue and two-component condensation glue. Two-component addition silicone rubber, before curing, has good fluidity, moderate operation time, convenient operation when used (the two components are mixed in equal proportion), small shrinkage rate after curing, no small molecule by-product release during curing, good high temperature and low temperature resistance (-65~250 ℃), high thermal conductivity, good vulcanization reaction resistance and good dielectric properties when sealed at high temperature. When in use, the two components can be mixed evenly according to A:B = 100:100 (weight ratio or volume ratio). The product has two ways to choose from at room temperature and medium temperature curing. It is non-corrosive to metal and non-metal materials and can be cured at the same time inside and outside. In order to increase the bonding performance of the potted element, some components that need better bonding can be pretreated with 7321 series primer before potting. Two-component condensation type silicone rubber, can be cured at room temperature into an elastomer. The cured product has excellent electrical insulation properties and chemical stability, as well as good water resistance, ozone resistance, and weather aging resistance. Good adhesion with metal and plastic. Can be used for a long time in -60~200 ℃. Application: two-component silicone rubber: mainly used in the sealing of electronic components with weather resistance, insulation, flame retardancy and heat dissipation requirements. Such as various specifications of communication modules, micro-transformers, line output integrated transformer insulation, heat dissipation, temperature resistance, flame retardant perfusion packaging, to high temperature resistance, insulation, sealing, waterproof, resist environmental pollution, eliminate stress and all kinds of vibration, to achieve long-term reliable protection of sensitive circuits and components. Two-component condensation type silicone rubber: potting of electronic components and instruments. When using, A and B are mixed according to the weight ratio of 100:10. It is suitable for manual and mechanical potting. Main models: NS-084-2,GA-0230-2,101,GA-0250-2,GA-0280-2(H),GA-0280-2(L),TLN-230-2,TLR-34,TLR-34B,TLR-630B......

Epoxy potting compound

Features: epoxy potting: two-component modified epoxy potting glue is cured at room temperature or temperature, and the cured product has the characteristics of smooth surface, good toughness and good insulation. The product has low viscosity before curing, good operation performance, moderate operation and curing time at room temperature, simple glue dispensing and convenient use. Use temperature range -25 ℃ 130 ℃, is a new generation of epoxy resin potting adhesive.

Silicone grease

Characteristics: 5201 silicone grease, polydimethylorganosiloxane and nano-sized silica and additives processed by a special process into a translucent grease. Thermal grease, a paste made of metal oxide with good thermal conductivity and insulation and polydimethylsiloxane. It has good thermal conductivity, good temperature resistance (can withstand -50 ℃ ~ 200 ℃ for a long time), and excellent construction process performance. Non-toxic, non-corrosive, tasteless, non-dry, non-hardening, stable chemical and physical properties.

High thermal conductivity gel

Typical use: LED chip, communication equipment, mobile phone CPU, memory module, IGBT and other power modules, power semiconductor interstitial heat conduction